Understanding Australian Pipe Marking Standards (AS 1345-1995)
AS 1345-1995 is the Australian pipe marking standard providing a consistent system for identifying the content of pipes and ducts in the workplace. By understanding and following applicable labeling standards, workers are able to quickly identify a pipe’s contents and take the proper safety measures. The standard was developed by Standards Australia—basically the Australian equivalent…
Jesse Allred | July 30, 2020 | Safety Solutions, Visual Safety | Labeling, Pipe Marking, Regulations & Compliance, Workplace Safety
Reopening Schools: Using Visual Communication to Promote Safety
As states are figuring out what the upcoming school year may look like, it’s clear that it will be months before schools can fully reopen without any restrictions. From temperature screenings to staggered recess times, schools will have a lot to consider whenever they are able to open their doors again. Many districts are looking…
Jesse Allred | July 20, 2020 | Floor Marking, Industry News, Safety Solutions, Visual Safety | Reopening Series
Elections 2020: Keeping Voters Safe at the Polls
Even with record numbers of COVID-19 cases in the United States, the wheels of democracy must still turn. For voters planning on showing up to the polls this November, the Centers for Disease Control and Prevention has published considerations for preventing the spread of coronavirus at election polling locations. According to the CDC, elections with…
Jesse Allred | July 14, 2020 | Industry News, Safety Solutions | Reopening Series
OSHA Guidance: Protecting Oil and Gas Workers During COVID-19
Earlier this week, OSHA published guidance for the oil and gas industry sector as a supplement to the general interim guidance for workers and employers of workers at increased risk of occupational exposure to SARS-CoV-2. In addition to following the guidance from federal agencies, it’s critical for employers to stay updated with changing outbreak conditions…
Jesse Allred | July 9, 2020 | Industry News, Safety Solutions | Reopening Series
What is ISO 3864?
The goal of a safety sign is to alert someone, typically an employee, to a policy or procedure quickly, giving them enough time to react and stay safe. With internationally agreed upon standards in place, people can recognize and understand these safety messages much quicker. ISO 3864—a series developed by the International Organization for Standardization—specifies…
Jesse Allred | July 6, 2020 | Safety Solutions, Visual Safety
Understanding the ISO 7010 Standard for Safety Signs
Safety signs are essential component of maintaining a safe and healthy environment for employees and anyone unfamiliar with your facility. The primary purpose of safety signs is to communicate important hazard information immediately, but they play a much more important role in supplementing safety training, highlighting safe exit routes, indicating safety equipment like first aid…
Jesse Allred | July 1, 2020 | Safety Products, Safety Solutions, Visual Safety
Healthy Dental Settings During the COVID-19 Outbreak
Patients are beginning to return to their dentist for regularly scheduled cleanings and procedures. As dental offices begin to resume care as normal, it’s important to remember these workplaces warrant specific infection control considerations. While generally considered an essential business, rules for dental offices differ greatly from state to state and at the peak of…
Jesse Allred | June 18, 2020 | Industry News, Safety Solutions | Reopening Series
National Safety Month & Safe Actions for Employee Returns
National Safety Month is here! Presented by the nation’s leading nonprofit safety advocate, the National Safety Council, this month is focused on saving lives and preventing injuries—from the workplace to anyplace. Due to unprecedented public health crisis we are currently experiencing with COVID-19, National Safety Month looks a little different from past years. In addition…
Jesse Allred | June 11, 2020 | Industry News, Safety Solutions | Safety, Social Distancing, Workplace Safety
Observing National Forklift Safety Day 2020
Did you know OSHA estimates forklift accidents cause approximately 61,800 injuries each year? Or that in their useful life, it’s estimated 90% of all forklifts will be involved in some kind of accident? Moreover, OSHA believes that about 70% of forklift accidents in the U.S. could be prevented with more stringent training policies. Each year,…
Jesse Allred | June 8, 2020 | Industry News, Safety Solutions | Forklift Safety, Safety, Workplace Safety
Reopening Workplaces Safely with a Return-to-Work Team
With so much uncertainty about the lasting impact of COVID-19 and regions beginning to lift stay at home orders, companies need to be prepared to welcome employees back. One way organizations can focus on how to best decrease the spread of the virus and lower the impact on the workplace is by putting together a…
Jesse Allred | June 3, 2020 | Industry News, Safety Solutions | Reopening Series, Safety, Social Distancing, Workplace Safety
5 Ways Construction Sites Can Work Safely Amid COVID-19
As COVID-19 continues to affect every state in the United States, construction crews are continuing to work on houses, roads, and buildings across the country. Construction firms, generally deemed as essential businesses, are having to change way they operate to protect themselves and the public. Like with any workplace hazard, employers should assess the hazards…
Jesse Allred | May 29, 2020 | Industry News, Safety Solutions | Construction Safety, Facility Marking, Floor Marking, Health, OSHA, Reopening Series, Safety, Safety Signs, Social Distancing, Workplace Safety
Back to Operations: Manufacturing Safety During the COVID-19 Outbreak
As more businesses are given permission to reopen, many manufacturing facilities are returning to normal operations. Due to the coronavirus pandemic, however, the way that workers must be protected has changed and manufacturing must now incorporate new health and safety policies. While these policies will be implemented differently in each facility, all manufacturers can protect…
Jesse Allred | May 21, 2020 | Safety Solutions | Health, OSHA, PPE, Reopening Series, Safety, Social Distancing, Workplace Safety
Celebrating National EMS Week 2020
Sunday marks the 46th annual National EMS Week honoring the lifesaving efforts of first responders, emergency medical technicians, paramedics, and all emergency medical services personnel. Ready Today, Preparing for Tomorrow is the theme of the 2020 EMS Week, presented by the American College of Emergency Physicians (ACEP) in partnership National Association of Emergency Medical Technicians…
Jesse Allred | May 15, 2020 | Industry News | Healthcare
Social Distancing for Casinos: Don’t Gamble on Safety
As casinos and resorts closed by the coronavirus begin to reopen, implementing proper safeguards to ensure a safe gaming environment is critical for public health and safety. Casino owners and workers should follow federal, state, and local protocols for preventing the spread of the coronavirus. The Nevada State Gaming Control Board, which regulates the most…
Jesse Allred | May 12, 2020 | Industry News, Safety Solutions | Floor Signs, Health, Reopening Series, Safety Signs, Social Distancing, Wall Signs, Workplace Safety
How Restaurants Can Practice Social Distancing
As parts of the country begin to reopen and customers start looking to eat out again, restaurants have an important role in keeping their communities safe. OSHA, the CDC, and the FDA have all issued guidance on preparing your workplace, including safety tips specifically for restaurants, and food and beverage businesses to protect their workers…
Jesse Allred | May 5, 2020 | Safety Products, Safety Solutions | Floor Marking, Health, Reopening Series, Safety Signs, Social Distancing, Workplace Safety