If you work in a factory or workshop, you understand just how important safety tapes are. Managers in non-office firms use the vinyl safety tapes to show important areas and mark off hazardous areas. There are various needs in the modern workplace, thus the need for a wide variety of safety tapes. For efficiency in alerting and directing people in the workplace, workshop and factory managers prefer a checkered vinyl safety tape to the solid vinyl safety tapes.
But again, you have to remember there are a number of solid vinyl tapes, and each has its significance. If the employees can understand what each of the colors represents, then it would be possible for them to reduce accidents in the workplace. To help curb the risks, management can rely on several color schemes.
One of the most common colors solid vinyl safety tapes is the red color. As you would guess, this kind of tape warns of a danger or harm. In the factory or workshop setting, managers use such a tape in areas where the danger of moving equipment causing injury is possible. This solid colored vinyl tape is also used around an open mechanical pit to warn people of the danger.
What about the yellow solid vinyl safety tape? This shows that an area is dangerous, but certainly not as dangerous as where you use the red colored safety tape. If you find an area with this kind of warning, you can proceed but with some caution. Incidentally, this is the most used safety tape in the workshop and factory setting. This is simply because in a factory or workshop, you are surrounded with dangerous equipment, and complete restriction cannot just work. This is how you live with the yellow solid vinyl safety tape warnings: always make sure you have looked for extra warnings such as danger of a falling object or slippery floor.
Another area where you need to observe extra caution is where a purple on yellow solid vinyl safety tape is used. Managers use such a tape to warn that the area is prone to radiation emissions. Here, you are not allowed to enter, unless you have been authorized. Sometimes, you see a magenta solid vinyl safety tape in such areas; it means the same as the purple on yellow tape. When managers use such a safety tape across an entrance, it means the entire room has the danger of emissions.
In many factories, the floors are slippery and this simply cannot be ignored. In such places, stairs are very risky areas, especially if you are a visitor. This is where the black white and yellow vinyl safety tape is used. Mostly, the tapes show the start and end of the stair cases. Sometimes, the tapes show each stair case if the danger of slipping is very high. The tape is also seen where there is the likelihood of a sudden increase of traffic.
It is very important for the workshop and factory management to alert workers and visitors of the dangers within the workplace. Solid vinyl safety tapes are one of the most effective ways of doing this.
- Colored Tape
- Black and Yellow Safety Tape
- Floor Marking Tape – Your Guide to Safety
- Blue Floor Tape
- Applying Safety Tape for Floors
- Beginner’s Guide to Installing Aisle Marking Tape
- Guaranteed Safety with Line Marking Tapes
- Safety Colors (OSHA Guidelines and Color Codes)– creativesafetysupply.com